home *** CD-ROM | disk | FTP | other *** search
/ Cream of the Crop 11 / Cream of the Crop 11-1.iso / windows / gtw95203.zip / README.TXT < prev    next >
Text File  |  1996-01-16  |  11KB  |  265 lines

  1. ===============================================================================
  2. Diamond GT Windows 95 Drivers with InControl Tools 95                README.TXT
  3. ===============================================================================
  4.  
  5. ** Important Notice **
  6.  
  7. Please note that you have been provided a BETA version of our GT Windows 95
  8. drivers with InControl Tools 95 that Diamond has tested.  However, similar to
  9. any BETA product, Diamond can not be responsible for any system problems
  10. encountered after installing these drivers.
  11.  
  12.  
  13. Release Notes
  14. -------------
  15. This is v.4.02.203 BETA of the Diamond GT Windows 95 Drivers disk, with
  16. InControl Tools 95 v.4.02.064 BETA.  This driver currently supports the
  17. following Diamond display adapters:
  18.  
  19.         Stealth64 Video 2000 series
  20.         Stealth64 Video 2001 series
  21.         Stealth64 Video 3000 series
  22.  
  23.  
  24. Windows95 Installation Notes
  25. ------------------------------
  26. 1.  From Windows 95, select Start, then Run.
  27.  
  28. 2.  Insert the Diamond GT Windows 95 Drivers diskette into your floppy drive.
  29.  
  30. 3.  In the Run dialog box, type in the following:
  31.  
  32.         A:\INSTALL <enter>
  33.  
  34.     Where A is the drive letter of the floppy drive containing the Diamond GT
  35.     Windows 95 Display Drivers / InControl Tools 95 diskette.
  36.  
  37.     The following command line switches can be used with INSTALL:
  38.  
  39.         /f              This forces a Full installation (Diamond GT 
  40.                         display driver and InControl Tools 95).
  41.  
  42.         /m              This forces a Minimal installation (Diamond GT
  43.                         display driver only).
  44.  
  45.         /d"drive:\path" This installs InControl Tools 95 into drive:\path. Note
  46.                         that the quotes around the drive and path are
  47.                         required, and that either the /f or /m must be used
  48.                         in conjunction with this switch.
  49.  
  50.         /r              This forces a system reboot after installation.  Note
  51.                         that either the /f or /m switches must be used in
  52.                         conjunction with this switch.
  53.  
  54.         /nr             This prevents a system reboot after installation.
  55.                         Note that either the /f or /m switches must be
  56.                         used in conjunction with this switch.
  57.  
  58.         uninstall       This will completely uninstall the Diamond GT display
  59.                         driver and InControl Tools 95.
  60.  
  61. 4.  From the Diamond Setup dialog box, select Next.
  62.  
  63. 5.  From the Hardware Check dialog box, select Next.
  64.  
  65. 6.  A dialog box will appear containing the path where InControl Tools 95 
  66.     will be installed.  The default path is:
  67.  
  68.         C:\Program Files\Diamond
  69.  
  70.     Select Next, or change the path as necessary.
  71.  
  72. 7.  The next dialog box selects the installation type.  There are three
  73.     installation types, Minimal, Full, and Custom.  They are defined as
  74.     follows:
  75.  
  76.          Minimal:  This will install only the Diamond GT display driver.
  77.  
  78.          Full:     This will install both the Diamond GT display driver
  79.                    and InControl Tools 95.
  80.  
  81.          Custom:   This will allow installation of either the Diamond GT
  82.                    display driver or InControl Tools 95.  At the minimum, 
  83.                    the Diamond GT display driver must be installed during
  84.                    a first-time installation.
  85.  
  86.  
  87. 8.  If Custom was selected in step 7, a dialog box will appear allowing
  88.     selection of various items.  Select the items to be installed by
  89.     clicking on them with the left mouse button.  When finished, click
  90.     Next to continue.
  91.  
  92. 9.  At the Select Files to be copied dialog box, click Next to begin the
  93.     file copy process.
  94.  
  95. 10. After the files have been copied, a Finished Installing dialog box will
  96.     appear.  Remove the installation diskette from the floppy drive, then click
  97.     Finish.
  98.  
  99. 11. Windows 95 will ask that the computer be restarted.  Click on Yes to
  100.     restart the computer.
  101.  
  102.  
  103. Known Limitations
  104. -----------------
  105. If these drivers are installed from "Have Disk" with the Microsoft S3 driver 
  106. already active, the Microsoft driver will overwrite the PCI frame buffer 
  107. address.  The system *MUST* be powered down after installing the Diamond GT 
  108. Windows 95 display driver to remedy this issue.  Note that this issue does not
  109. occur when installing over the Microsoft VGA driver.
  110.  
  111. When installing DirectX applications, a dialog box may appear asking if
  112. you would like to install a certified DirectX driver.  You should select
  113. "No", so that the Diamond GT drivers will not be overwritten.  The Diamond GT
  114. drivers will be DirectX-certified as soon as certification begins by Microsoft.
  115.  
  116. MechWarrior 2 for Windows 95 will give a black screen if run in 640x480 mode.
  117. Use 320x200 mode to resolve this issue.  This problem is being investigated.
  118.  
  119. A General Protection Fault may occur by running After Dark for Windows v.3.1.
  120. Upgrading to After Dark v.3.2 will resolve this issue.
  121.  
  122. To view the Online Internet Services, your World Wide Web browser must be
  123. registered with the Windows 95 Registry.
  124.  
  125. Using Microsoft's The Fox and The Bear application in 640x480 16bpp, the
  126. display will not be correct.  This problem is being investigated.
  127.  
  128. If you encounter problems when setting modes, you may want to try one of the
  129. Standard Monitor Types in the Monitor Type dialog of the Display Properties
  130. sheet.
  131.  
  132. With some BIOSes, you may encounter problems switching between the desktop and
  133. 320x200 or 320x240 DirectDraw modes.  This problem is being investigated.  A
  134. BIOS upgrade may address this for you.  See below for more information on
  135. BIOSes.
  136.  
  137. With some BIOSes, the Diamond GT driver may not correctly identify your Diamond
  138. display adapter.  A BIOS upgrade may address this for you.  See below for more
  139. information on BIOSes.
  140.  
  141. The following BIOSes have been tested with the Diamond GT display driver.  If
  142. you have an older BIOS and are encountering difficulties, it is recommended
  143. that you contact Diamond Customer Service at 408-325-7100 (option 3) to get the
  144. current version of the BIOS for your Diamond display adapter:
  145.  
  146.         Stealth64 Video 2000 series:    BIOS 1.02
  147.         Stealth64 Video 2001 series:    BIOS 1.00, 1.01, 1.03
  148.         Stealth64 Video 3000 series:    BIOS 1.04, 1.06
  149.                                         BIOS 2.04, 2.07
  150.                                         BIOS 3.00, 3.01
  151.         Stealth64 Video 3200:        BIOS 1.06, 1.16
  152.                     BIOS 2.06, 2.16
  153.  
  154. Using Delrina WinFax Pro 7.0, you must turn off the InControl Desktop Manager
  155. to prevent the FAXMNG32 from causing a General Protection Fault in WFXUT32C.DLL.
  156. This problem is being investigated.
  157.  
  158.  
  159. Issues Addressed
  160. ----------------
  161.  
  162. DDC monitors are now supported in this release.
  163.  
  164. Using a Stealth64 Video 2001 series card at 1280x1024 8-bit desktop with a
  165. 640x480 viewport, the viewport will now be displayed correctly.
  166.  
  167. If you have an MVP 2000 module for your Stealth64 Video 3000 series card, you
  168. may experience icon corruption.  If this occurs, power the system off, and when
  169. the "Starting Windows 95..." dialog appears, press F8, then select Safe Mode.
  170. After Windows 95 starts in Safe Mode, shut down Windows 95, then restart
  171. normally.  This is addressed in this release of the Diamond GT drivers.
  172.  
  173. Run Corel Draw 6.0 | Open new document | Type a text | Select the text | Choose
  174. "Effects/Extrude" from menu | Select any effect but Extrude01 to 10, it would
  175. show the text and the a background on top of it.
  176.  
  177. Buttons on button bars in some applications were corrupted.
  178.  
  179. If you installed with the Default Monitor with a Stealth64 Video 2001 series,
  180. the display would not initialize.
  181.  
  182. Full screen DOS sessions now work correctly with the Stealth64 Video 3000
  183. series equipped with the IBM 526 RAMDAC.
  184.  
  185. Uninstall now removes the Diamond GT driver and InControl Tools 95 files.
  186.  
  187.  
  188. A Note From the Diamond GT / InControl Tools 95 Development Team
  189. ----------------------------------------------------------------
  190.  
  191. Based on feedback provided by our customers, Diamond has delayed the final
  192. release of the Diamond GT / InControl Tools 95 product set.  The final release
  193. is scheduled for the week of January 22.  We are currently addressing several
  194. issues in the driver, adding a user-defined monitor utility, and verifying
  195. monitor timings.  We believe that these will be great enhancements to the
  196. Diamond GT / InControl Tools 95 product set.  We thank everyone for their
  197. valuable feedback on this product.  We believe that the final product will
  198. meet your expectations.  Thank you for your continued support!
  199.  
  200.                    ---The Diamond GT / InControl Tools 95 Development Team
  201.  
  202.  
  203. Win Cool Stuff From Diamond!
  204. ----------------------------
  205.  
  206. For a limited time, you can win cool stuff from Diamond for reporting problems
  207. in the Diamond GT / InControl Tools 95 product!  The first 100 people that
  208. follow the below criteria for reporting problems will win an Official Diamond
  209. Beta Tester T-shirt, as well as free shipping and handling on their own copy
  210. of the Diamond GT / InControl Tools 95 CD-ROM.  The criteria for winning are:
  211.  
  212.         1.  Only the first submitter of a problem will be eligible for the
  213.             prizes.
  214.  
  215.         2.  Only problems that can be verified by Diamond Multimedia will be
  216.             eligible.
  217.  
  218.         3.  Problem reports must be submitted to Diamond via CompuServe mail.
  219.             Those people who are not members of CompuServe may submit problem
  220.             reports to the following Internet e-mail address:
  221.  
  222.                 75300.3673@compuserve.com
  223.  
  224.         4.  Problem reports must be submitted in the form of a PDR.  A blank
  225.             PDR can be found in the PDR.TXT file included with this product.
  226.  
  227.  
  228.  
  229. Contacting DIAMOND
  230. ------------------
  231.  
  232. If any problems or difficulties are encountered while using this driver, please
  233. fill out a problem report (PDR.TXT) included with this product and forward it
  234. to Diamond Multimedia. You may send the problem report to us via any of the
  235. methods below.  Please do NOT call Diamond's Technical Support for difficulties
  236. you encounter.  Technical Support cannot offer direct support for this BETA
  237. driver.
  238.  
  239. Postal Service  : Diamond Multimedia Systems, Inc.
  240.                   ATTN: Technical Support - BETA Driver
  241.                   2880 Junction Avenue
  242.                   San Jose, CA  95134-1922
  243. FAX             : (408) 325-7171
  244. BBS (to 14400)  : (408) 325-7080
  245. BBS (to 28800)  : (408) 325-7175
  246. CompuServe      : GO DIAMOND
  247. America Online  : GO DIAMOND
  248. MSN             : GOTO DIAMONDONLINE
  249. WWW             : http://www.diamondmm.com
  250. FTP             : ftp.diamondmm.com
  251. Internet E-Mail : 75300.3673@compuserve.com
  252.  
  253.  
  254. All product names listed are trademarks or copyrights of their
  255. respective owners.
  256. ===============================================================================
  257. Diamond Multimedia Systems, Inc.                                    (c) 1993-96
  258. (408) 325-7000                                              All Rights Reserved
  259. ===============================================================================
  260. $Id: readme.tx@ 1.32 1996/01/16 01:42:00 kevinw Exp $
  261. ===============================================================================
  262.  
  263.  
  264.  
  265.